Filter
Top Products
5.Securing the dishwasher
To ensure stability, the dishwasher must
be fixed securely to the worktop. Two
securing pieces are supplied with the
dishwasher for this purpose.
^ Fit the securing pieces into the slots
on both the left and right hand sides.
^ Push the dishwasher right back into
its recess (making sure it is correctly
aligned).
^
Open the dishwasher door.
The holes in the securing pieces
must line up with the long holes in
the worktop cover plate. If this is not
the case, adjust the position of the
dishwasher in the niche (ensure that
the dishwasher is the same distance
from the neighbouring kitchen units
on the right and left hand sides and
line the dishwasher door front up
with neighbouring door fronts).
^
Screw the countersunk screws
(3.9 x 22) supplied upwards through
the securing pieces on the left and
right hand sides into the work surface
to secure the dishwasher.
Ensure that the seal on the top edge
of the dishwasher fits directly
against the worktop.
If this is not the case, adjust the feet
a bit more (see step 2 "Screw feet").
Granite and marble worktops
:
With these worktops the dishwasher
must be securely screwed to
neighbouring units on the right and left
hand sides. To do this you need two
special fixing brackets. These are
included in the accessory pack
supplied with the dishwasher together
with fitting instructions.
Installing built-under "U" model dishwashers
31