Filter
Top Products
Salt indicator
The salt indicator light comes on to no
-
tify you that the reservoir is empty.
^ The reservoir should then be refilled
with dishwasher salt for reactivation.
(See: Filling the salt reservoir).
After the reservoir has been filled, the
water softener is automatically reacti-
vated the next time the dishwasher is
run. The salt indicator light may still be
illuminated during this process. It will
go out once the salt concentration has
reached the correct level.
Note
If the water in your area is very soft and
constantly lower than 0.7 mmol (4 °d)
you do not need to add salt to the res
-
ervoir. The salt indicator light, however,
will still come on, but should be ig
-
nored.
(See "After sales service" for definition
of "PC").
Before using for the first time
17