Filter
Top Products
Problem Possible cause Remedy
The "End", "Start/Stop"
and "Top Solo" indica
-
tor lights flash simulta
-
neously at the end of a
programme
There may be a technical
fault.
–
Press the "Start/Stop"
button
–
Switch the dishwasher
off using the "On/Off"
button.
After a few seconds:
–
Switch the dishwasher
on using the "On/Off"
button.
–
Then use the
programme selector
buttons to select the
programme you wish to
use.
– Press the "Start/Stop"
button
If the indicator lights flash
again, there is a technical
fault.
– Call the Miele Service
Department.
Problem solving guide
49