Filter
Top Products
Extend drying
If desired drying results are not
consistently achieved, the heating
element can be activated to heat at the
end of a program.
The "Extended drying" feature can also
be activated to prevent condensation
from collecting on the steam deflector.
Turning extended drying on/off:
^
Open the door.
^
Turn off the dishwasher using the
"Off" button (16).
^ Press and hold the a and c buttons.
At the same time turn on the
dishwasher using the "On" button
(15).
^ Release all buttons.
The "Salt" and b indicators will flash.
If this is not the case, the above steps
must be repeated.
The extended drying is on:
if the a indicator is not lit.
The extended drying is off:
if the a indicator is lit.
^
Press the a button to change the
setting.
The a indicator will light or go out
accordingly.
^
Press the f button twice to store the
new setting.
^
Turn off the dishwasher.
Operation
35