Filter
Top Products
Burner
The burner can be dismantled and
cleaned when cool.
Dismantling and cleaning
^
Remove the burner parts and wash
them in a solution of warm water and
liquid dish soap
^
Dry thoroughly. Make sure that the
flame holes are clean and completely
dry.
The shiny surfaces of the burner caps
will dull with time and use. This is
normal and will not affect the operation
of the cooktop.
^ Clean the burner base, ignitor and
Ignition Safety Control with a damp
cloth and then dry.
The ignitor must be thoroughly dry, or it
will not spark.
Reassembling the burner
^ Fit the burner onto the burner base, a.
^
Fit the burner ring.
^
Put the large burner cap on the large
burner cap base, b.
^
Fit the small burner cap.
^
Put the grate in place, c.
^
Put the trivet in place if needed.
Be careful not to mix up the parts.
Make sure that all the notches and
holes align exactly.
Cleaning and care
16