Filter
Top Products
Problem Possible cause and remedy
Cakes and biscuits
are not cooked
properly after
following the times
given in the chart.
–
Check that the correct temperature has been set.
–
Check whether there has been a change to the recipe.
The addition of more liquid or more eggs makes a
moister mix which would need longer to cook.
Browning is uneven. There will always be a slight unevenness. If browning is
very uneven, check
with Fan plus U:
–
whether the temperature was set too high,
–
whether the correct shelf level was used.
with Conventional V:
–
the colour and material of the baking tins being used.
Light coloured, shiny, or thin walled tins are less suitable.
– whether the correct shelf level was used.
There are spots like
rust on the catalytic
surfaces.
When roasting on the rack, the circulating air sometimes
picks up spices, which are then deposited on the oven
interior walls. These residues are not removed by catalytic
cleaning, and should be removed while fresh with a mild
solution of hot water and washing up liquid applied with a
soft brush.
"0k00" is flashing in
the display.
All pre-set tmes have been lost because of a power cut.
The buzzer will also have been reset to the default tone.
Reset the time and the buzzer tone.
Problem solving guide
48