Filter
Top Products
Installation - Hobs with enclosed hotplates
When installing a hob there may be a
wall at the back and a wall or tall unit at
one side. On the other side there must
not be a unit or wall which stands
higher than the hob.
Because of the heat given off, there
must be a minimum distance as fol-
lows:
– 50 mm between the worktop
cut-out and adjacent furniture,
e. g. tall unit.
– 50 mm between the back wall
and the worktop cut-out.
– Maintain the safety distance
between the hob and a cooker
hood above it as recommended
the manufacturer. Where no
figures are given, e.g. for a pot
or utensil hanging rail, the safety
distance must be at least 760 mm
for inflammable objects.
Building-in KM 200
* building-in height
Prepare the worktop cut-out as
illustrated.
b Sealing ring
c Hob
d Worktop
e Clamps
f Screw
Loosen the screws f.
Set the hob unit c into the cut-out
and centre it.
Turn the screws f to the right, until
the clamps
e are firmly attached to
the worktop
d.
Check that the hob unit c fits tightly
on to the worktop.
1 2
4
5
3
Installation - Hobs with enclosed hotplates
73