Filter
Top Products
. . . cakes or biscuits are unevenly
browned.
There will always be a slight uneven-
ness. Product information sheets give a
percentage result for standard brown-
ing tests. These refer to results for one
tray.
If the item being baked is browning
very unevenly, check:
– when baking with "Fan Heat D":
whether the temperature was set too
high,
whether the roasting filter was in
place,
whether the correct runner height
was used.
– when baking with "Conventional A":
the colour and composition of the
baking tins being used. Light col-
oured, shiny, or thin walled tins are
less suitable,
whether the correct runner height
was used.
. . . the display light does not come
on when a hob control is switched
on (depending on the model).
The lamp needs changing.
The lamp must be changed by Miele
customer service.
. . . there has been a power failure,
and instead of the time of day "0
·
00"
and "AUTO" flash in the display.
All pre-set times are deleted as a result
of the power failure.
Enter the time of day again, and any
other pre-set data.
. . . "0
·
00" appears when the audible
tone is switched off.
This is not a fault.
The time of day will shortly reappear in
the display field.
. . . "AUTO" flashes in the timer dis-
play.
This might signal a data entry mistake,
– for example entering conflicting
times.
– if the time of day is changed while a
start and finish time have been pre-
set.
– when the audible tone is switched off
by pressing the "g" and ")" but-
tons.
Correcting minor faults
53