Filter
Top Products
Oven interior
The oven interior is coated with an
extremely smooth dark pyrolytic enamel
which facilitates cleaning.
Because of its non-stick properties
most debris can be easily removed with
a damp cloth. This should be done after
each use.
If the oven is not cleaned regularly,
debris may become extremely difficult
to remove even with the Self Clean
program.
Never use hard brushes, hard
sponges, wire wool pads, knives or
any other scourer. These may
damage the enamel.
Self Clean program
During Self Clean the oven is heated to
very high temperatures to remove any
residual soiling.
One minute after the Self Clean
program starts, the oven door will
automatically lock. The lock will only
release when the program has
completed and the oven temperature
has fallen below 530°F/280°C.
The length of the Self Clean program
will depend on the level of soiling in the
oven.
Remove large pieces of debris and
any puddles of grease from the oven
interior before starting the Self Clean
program.
Remove all accessories including
the runners from the oven before
starting the cleaning program.
Do not touch the oven door during
the Self Clean program. The door
may become very hot.
Keep children away from the hot
oven.
^ Turn the program selector to "Self
Clean".
"PYRO" will light, and the "p" symbol will
flash in the oven display.
^ Press the "Temp." button.
As soon as the "Temp." button is
pressed,
–
the "p" symbol lights up,
–
the oven door will lock after
1 minute,
–
the cleaning process begins,
–
the catalytic converter turns on.
Cleaning and care
45