Miele H 4641 Convection Oven User Manual


 
...a fault message appears in the
display
Faults which you can rectify yourself,
are indicated by the following message
"Please read notes in the operating
instruction booklet".
Fault 23
The pyrolytic temperature of approx.
460 °C was not reached.
This could have been caused by too
much soiling in the oven to start with.
Remove all coarse soiling before
starting the pyrolytic cleaning
programme again.
If the fault message appears again
please contact the Miele Service
Department.
Fault 32
The door lock for the pyrolytic cleaning
programme has not shut.
Interrupt the pyrolytic cleaning
programme by switching the oven off.
Then start it up again. If the fault
message appears again please contact
the Miele Service Department.
Fault 33
The door lock for the pyrolytic cleaning
programme will not open.
Interrupt the pyrolytic cleaning
programme by switching the oven off.
Then start it up again. If the door lock
will still not open please contact the
Miele Service Department.
Fault 54
The roast probe is defective.
Remove the probe from its socket and
the message will disappear.
Fault 55
The oven has automatically switched
itself off during use. This is a safety
feature to protect the oven if it has been
operating for an exceedingly long
period. The length of time depends on
the oven function selected.
The oven can be used again immedi
-
ately by simply turning the oven off and
on again.
Faults which you cannot rectify
yourself, are indicated by the following
message "Please call the Service
Department.".
Problem solving guide
68