Filter
Top Products
To enter basic settings
The oven will switch on automatically
when it is connected to the electricity
supply.
Welcome screen
A welcome screen will appear in the
display, and you will then be requested
to select some basic settings which are
needed before the appliance can be
used.
Follow the instructions in the display.
Setting the language
First select the language you want:
^ Scroll through the list using one of the
sensors to the right of the arrows
% /
( until the language you require
appears in the display.
^ Touch the sensor to the left of the
language you want.
A tick L will appear beside the
language you have selected.
^
Confirm your choice by touching the
sensor next to "OK".
If you have selected the wrong
language by mistake, proceed as
described in "Settings - Language J"
to get back to the correct language.
Clock format
The request to select the Clock format
will appear. The default setting for the
clock is 24 h.
^
Touch the sensor to the left of the
clock format required.
A tick L will appear beside the clock
format you have selected.
^
Confirm with "OK".
Setting the time of day
You will then be asked to enter the time
of day. The hour is highlighted.
^
Using the numerical keypad, enter
the hour, confirm with "OK" and then
enter the minutes in the same way.
Time of day display
Finally you will be asked when you want
the time of day to show in the display
when the appliance is switched off; see
"Settings - Time - Display".
ß On
The time is always visible in the
display.
ß On for 60 seconds
The time is only ever visible for
60 seconds.
ß Do not display:
The display remains dark.
^
Touch the sensor to the left of the
setting you want.
After you have confirmed your selection
with "OK", the display will show a
message to tell you that:
–
your appliance is equipped for the
Miele|home system.
–
your appliance has been successfully
set up to use it for the first time.
As soon as you confirm this last
message with "OK", your appliance is
ready for use.
Before using for the first time
28