Filter
Top Products
What if … Possible fault Fix
the "Water inlet"
indicator is lit or
flashing. The
dishwasher may have
stopped?
The water valve is closed. Open the water valve.
The filter in the water inlet
is blocked.
See maintenance
instructions.
The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar).
Contact a plumber.
The waterproof system has
activated.
Contact the Miele
Technical Service
Department.
the "Water inlet"
indicator lights during
the "Energy Saver"
program?
The intake water has not
reached the required
temperature of
115 °F/45 °C, the hot water
system may be
overloaded, see "Program
guide".
– Start the program again.
– If the indicator light
comes on again, select
a different program.
Frequently asked questions
40