Filter
Top Products
^ Position the plinth facing along the
run of kitchen units a.
^
Mark the protruding section A on the
ventilation grille bracket a with a
pencil, then take the plinth facing b
off again.
^
Cut protruding section A off the
ventilation grille.
^
If the front slat on the facing does not
align with the front edge of the plinth
facing, cut off another slat a.
^ Use pliers to remove the vertical ribs
b.
^
Shorten the ventilation grill supports
b by dimension A
(= ventilation grille bracket
overhang).
^
Secure the plinth facing to the run of
kitchen units a.
^
Push the ventilation grille onto the
bracket c.
Installing the appliance
37