Filter
Top Products
^
Slide soft-close mechanism bracket
f as far as it will go towards the
handle side of the door, and undo
screws g on the soft-close
mechanism.
^ Using a flat-bladed screwdriver, slide
the soft-close door mechanism
towards the handle side of the door,
and lever it out at the side.
^ Place the soft-close mechanism to
one side.
Changing over the door
Make sure the door shelves are
empty.
^
Close the appliance door.
^ Remove cover a by sliding it
forwards from the back and then
lifting it off.
^ Remove cover b by pulling it
upwards.
Caution. The appliance door is not
secure when the hinge plate has
been removed.
^
Loosen screws d in upper hinge
plate c and pull it upwards and off.
^
Carefully lift the door off and place it
to one side.
^
Gently loosen cover e by carefully
inserting a flat-bladed screwdriver
into the gap from below.
^
Remove cover e together with
retaining plate f.
Changing the door hinging
49