Filter
Top Products
The appliance door can be aligned
retrospectively to the housing using the
outer long slots in the lower hinge plate.
In the following illustration the door
is not shown in the closed position to
make it easier to see what you have
to do.
^ Remove centre screw a from the
hinge plate.
^ Slightly loosen both outer screws b.
^ Align the door by sliding the hinge
plate to the left or right.
^
Then tighten screws b again. Screw
a does not need to be used again.
Stainless steel appliances
(height adjustable door)
The appliance door can be aligned
retrospectively at the side of the lower
hinge plate:
^ Unscrew threaded pin a by a
maximum of one turn using the allen
key supplied.
^
Adjust the height of the hinge pin
using the spanner supplied.
To raise the door:
turn clockwise
To lower the door:
turn anti-clockwise.
^
Tighten the threaded pin.
The hinge pin is now fixed in position
again.
Aligning the appliance
56