Filter
Top Products
Ventilation
Air at the back of the appliance gets
warm. To ensure sufficient ventilation,
the ventilation gaps must not be
covered or blocked in any way. They
should be dusted on a regular basis.
Appliances with wall spacers
supplied
The wall spacers supplied with
some appliances must be used in
order to achieve declared energy
consumption values. Appliance
depth is increased by approx. 35
mm with the wall spacers fitted. If
the wall spacers are not used, this
does not influence the functionality
of the appliance. Energy
consumption is only minimally
increased if there is little distance
between the appliance and the wall.
^
Fit the wall spacers onto the back of
the appliance on the top left and
right.
Installation
^
Remove the cable clip from the back
of the appliance.
^
Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
^
Position the appliance with the wall
spacers (if used) or the back close to
the wall.
Aligning the appliance
^ To align the appliance, adjust the feet
using the spanner supplied.
Levelling the appliance door
^
Ensure that you unscrew adjusting
foot a from the hinge plate until it sits
on the floor. Then unscrew the foot by
a further 90°.
Installation
40