Filter
Top Products
^
Unscrew the lamp. This requires
some strength, as the safety catch
needs to be released.
^
Change the lamp.
Lamp specification:
220 - 240 V, E 14 fitting
See the old lamp for the Wattage
required.
^ Screw the new lamp into the
connection. Make sure the safety
catch is correctly fitted a.
^ Replace the lamp cover, and click it
into place at the sides.
. . . the floor of the refrigerator is wet.
The drain hole is blocked.
^
Clean the condensate channel and
drain hole.
If you still cannot remedy the fault
having followed these suggestions,
please contact the Miele Service
Department.
To prevent unnecessary loss of
temperature, it is advisable not to
open the doors while waiting for the
appliance to be serviced.
Problem solving guide
33