Filter
Top Products
The ventilation gaps must not be
covered or blocked in any way.
They should be dusted on a regular
basis.
Before installing the appliance
^
Before installation remove the cover
strip, sealing strip and other
accessories from inside the
appliance and from the external rear
wall of the appliance.
^ Do not remove the spacers from the
back of the appliance. These ensure
the gap required between the back
of the appliance and the wall is
maintained.
^
Remove any cable clips from the
back of the appliance.
^
Remove the red transport fixing a,
and use the stopper supplied b to
plug the empty hole.
^
Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
Installation
38