Filter
Top Products
Note:
–
Do not twist or jam the appliance
inside the niche. When unscrewing
the height-adjustable feet, proceed
gradually, alternating between left
and right.
–
The adjustment of the rear feet is
aided if the appliance is lifted at the
rear (tipped forward slightly).
–
If using a wooden beam as an
alternative anti-tip device, rotate the
appliance all the way toward the
wooden beam.
– Do not use a power tool to adjust the
rear feet!
Attaching the appliance to the
installation niche
^
Screw the attachment plate lugs h to
the overhead furniture/fixtures.
If there is no way to attach the top of
the appliance, it can be attached to the
sides of the installation niche.
^
Pull out the plate side lugs i.
^ Secure the attachment plate side lugs.
If there is a fairly large gap above the
appliance, cut a wooden beam to fit
exactly and place it in the gap.
^
If necessary, shorten the filler strip j
to the required height.
^
Place the 2 strips on top of each
other k.
^
Insert the filler strip until you hear it
click into place l.
Installing the appliance
66