Filter
Top Products
Attaching and aligning the
custom door front
^
Fit the door handle to the custom
door.
Note that the screws are applied from
the reverse side.
^ Open the door and hang the custom
door with the adjusting rail over the
double-threaded bolts p.
^
Screw the nuts q a few turns onto
the double-threaded bolts. Do not
tighten completely.
^
Close the door.
^
Adjust the custom door to adjacent
furniture/fixtures.
^
Align the custom door with the
double-threaded bolts.
^
Tighten the nuts on the adjusting rail.
This will correct the side alignment of
the door.
^ Put the side strips o back into place
and screw them completely down on
both sides of the appliance door.
^ Align the custom door again as
needed and tighten all screws on the
sides.
To mount the custom door on the
lower appliance door, simply repeat
the steps under "Preparing the
custom door".
^
The position of the lower furniture
door depends on the position of the
upper door.
Installing the appliance
70