Filter
Top Products
The newly selected temperature will be
adopted automatically after a short
while.
The indicator for the temperature which
has been set for the refrigeration
section will light up.
The indictator for the temperature which
has been set for the freezer section will
flash until that temperature is reached.
The temperature can be set to be
slightly colder than the temperature
range shown on the control panel for
the refrigeration and freezer
sections.
The following example shows how to
set the freezer section temperature
lower than -15 °C but not as cold as
-18 °C:
^ Press the temperature button
repeatedly until the indicator light for
-15 °C lights up in the display.
^ Press it again for approx. 5 seconds
to set the temperature below - 15 °C.
The temperature has now been set
between -15 °C and -18 °C. However,
this is not visible in the temperature
display.
Temperature display
The temperature display on the
control panel always shows the
required temperature.
Temperature range
The temperature can be adjusted:
–
In the refrigerator section from 1 °C
to 9 °C.
–
In the freezer section from from
-15 °C to -32 °C.
The ambient temperature in the room
and the installation location can affect
the time it takes for the appliance to
reach the lowest temperature. If the
ambient temperature is too high, the
appliance may not reach the lowest
temperature.
The relevant temperature indicator
light will flash if a different
temperature is being set.
The freezer section temperature
indicator light will also flash if
–
the temperature in the freezer
section is not within the possible
temperature range.
–
the temperature in the freezer
section has risen by several degrees,
indicating that it is warming up too
much.
The alarm off indicator will flash at the
same time.
The correct temperature
16