Filter
Top Products
Moving the shelves
The shelves in the refrigerator section
can be adjusted according to the
height of the food.
^
Raise the shelf, and pull it forwards
slightly until the notch at the side is in
line with the shelf support. It can then
be raised or lowered to the required
level.
The raised edge at the back must face
upwards to prevent food from touching
the back of the appliance and freezing
to it.
Stoppers prevent the shelves from
being dislodged by mistake.
Split shelf
In order to accommodate tall items in
the appliance, one of the shelves is
divided. The front section can be
pushed under the rear section.
^ Push the rear half of the glass shelf
up slightly from below.
^
At the same time, pull the front half of
the glass shelf forwards slightly and
then push it carefully under the rear
half.
To move the split shelf:
^
Take both halves of the split glass
shelf out,
^
fit the two brackets onto the supports
on either side at the required height,
^ and push the glass shelves in one
after the other.
The shelf with the raised edge must
be at the back.
Fruit and vegetable containers
on rollers
The fruit and vegetable containers are
pushed in and out on rollers, and can
be completely removed if necessary.
The rollers can also be removed for
cleaning.
Adjusting the interior fittings
24