Filter
Top Products
^ Remove cover h, and unscrew hinge
bracket i.
^ Fit hinge pin j in the second hole of
hinge bracket i.
^ Refit bracket k and cover l turned
through 180° on the opposite side.
^
Screw hinge bracket i into the
opposite side.
The M4 screw has to be screwed into
the left hole of the hinge bracket.
^
Turn cover h through 180°, and fit it
on the other side.
^
Exchange cover m in the middle of
the appliance with hinge bracket n.
To do this:
Unscrew cover m and hinge bracket
n, turn them around and screw in on
the opposite side.
^
Pull bearing bush o downwards out
of hinge bracket n and refit it from
above into the hinge bracket.
^
Remove spacer p with a screwdriver
and refit it on the opposite side.
^
Remove plugs q from the door
bearing bushes in the doors and refit
on the opposite side.
^
Hang the door on hinge pin j and
then close the appliance door.
^
Push middle hinge pin f from below
through hinge bracket n into the
upper appliance door.
^
Check that the upper door is
correctly aligned. If necessary, align
it using the long slots in hinge
bracket n.
^ Hang the lower door in hinge bracket
n then close the appliance door.
Changing the door hinging
43