Filter
Top Products
Burner
The burner can be dismantled and
cleaned when completely cool.
Dismantling and cleaning
^
Remove the burner parts and wash
them in a solution of warm water and
liquid dish soap.
^
Dry them thoroughly. Make sure that
the flame holes are clean and
completely dry.
The shiny surfaces of the burner caps
will dull with time and usage. This is
normal and will not affect the operation
of the cooktop.
^ Wipe the burner base clean with a
damp cloth and then dry.
^ Gently wipe the ignitor and Ignition
Safety Control with a damp cloth, and
then dry with a soft cloth.
The ignitor must be thoroughly dry or it
will not spark.
Reassembling Auxiliary, Normal and
Fast burner
Be careful not to mix up the parts. Make
sure that all the locating tabs and
notches align exactly.
^ Place the burner head, b, onto the
burner base, a, so that the Ignition
Safety Control and ignitor extend
through their respective holes.
^
Return the burner cap, c.
^
Return the grate.
Cleaning and care
17