Filter
Top Products
Switching on
The hob must be switched on before any of the zones can be
used.
Do not leave the appliance unattended whilst it is being
used.
To switch the hob on
^
Touch the s sensor.
0 will appear in each of the cooking zone displays. 00 will
appear in the timer display. If no further entry is made, the
hob will switch itself off after a few seconds for safety
reasons.
Switching on a cooking zone, setting a power level
^ Touch the sensor for selecting the cooking zone you want.
A 0 will flash in the cooking zone display.
^ Whilst the 0 is flashing, select a power level of between 1
and 9 by touching the - or + sensor.
To select cooking with Auto heat-up, press the - sensor
first (see "Auto heat-up"). To select cooking without Auto
heat-up, press the + sensor first.
The power level selected flashes in the display for a few
seconds to start with and then lights up constantly.
Altering the power level
^
Touch the sensor for selecting the cooking zone you want.
The power level will flash.
^
Touch the + or - sensor to set the power level you want.
Operation
19