Filter
Top Products
Programming
You can change the default settings of programme options
(see chart). Several settings can be altered in succession.
After programming mode has been called up, P
(Programme), S (Status) and numbers will appear in the
cooking zone displays. These show the current settings.
To call up programming mode
^
With the hob switched off, touch the s and $ or n
sensors at the same time until the relevant indicator lamp
flashes.
To set a programme / status setting
^ Touch the sensor for selecting the front left cooking zone.
^ Touch the + or - sensor to set the required Programme
setting.
^ Touch the sensor for the front right cooking zone.
^ Touch the + or - sensor to set the required Status setting.
To save settings
^ Touch the s sensor until all the displays go out.
To not save settings
^
Touch the $ or n sensor until all the displays go out.
Additional functions
37