Filter
Top Products
Setting the timer to turn off a
burner automatically
To use this feature, a power setting
must be selected for the desired
burner. All burners can be programmed
at the same time.
^
Turn the desired burner on, e.g. rear
right, and select a power level.
^
Touch the m sensor until the
indicator of the desired burner lights,
e.g. rear right.
If multiple burners are turned on, the
indicators for the activated burners light
clockwise from front left to front right.
^
Touch the - or + sensor until the
desired time is displayed, e.g. 15
minutes.
The set time counts down in minutes.
The remaining time is displayed and
can be changed at any time by
pressing - or +.
When the set time has elapsed the
burner will automatically turn off. The
burner display shows 0, the timer
display shows 00 and a tone is heard.
After a few seconds the tone stops and
the 00 goes out. To end the tone touch
the m sensor.
Timer
21