Filter
Top Products
Installation work and repairs to
electrical appliances must only be
carried out by a suitably qualified
and competent person in strict
accordance with current local and
national safety regulations (BS 7671
in the UK). Repairs and other work
by unqualified persons could be
dangerous. The manufacturer
cannot be held liable for
unauthorised work.
What to do if, ...
... the hob or cooking zones cannot
be switched on
Check whether
– the pans being used are suitable.
– the safety lock is activated.
If necessary, deactivate it (see
"Safety lock").
–
the mains fuse has blown.
If none of the above is the case, then
disconnect the appliance from the
electricity supply for approx. 1 minute.
To do this:
–
switch off at the mains, or
–
withdraw the mains fuse.
Reset the trip switch in the mains fuse
box, and switch the appliance back on.
If it still will not switch on, contact a
qualified electrician or the Miele Service
Department.
... the hob can be switched on and
settings selected, but the cooking
zones do not heat up
Check whether you set the demo-mode
setting by mistake (see "Programming -
P0").
... an ß appears in the display for a
cooking zone
Check whether
–
the zone was switched on by mistake
without a pan on it.
– the pan being used is suitable for
use on an induction zone, and that it
is large enough (see "Suitable pans").
... an individual cooking zone or the
whole hob has switched itself off
automatically
The safety switch-off feature or the
overheating protection mechanism has
been triggered (see "Safety switch-off"
and "Overheating protection").
Problem solving guide
46