Filter
Top Products
Problem Possible cause Remedy
The sensors are
over-sensitive or do
not react at all.
The sensitivity level of
the sensors has
changed.
Make sure that there is no direct
light (from the sun or from an
artificial source) falling onto the
hob and that the surrounding
area is not too dark.
Make sure that there is nothing
covering the sensors or the hob.
Take any pans off the hob and
wipe away any food deposits.
Interrupt the power supply to the
hob for approx. 1 minute.
If this does not solve the
problem, please call the Miele
Service department.
FE flashes alternately
with numbers in the
timer display.
FE 44 The overheating
protection
mechanism has
triggered.
See "Overheating protection".
FE 47 The fan is either
blocked or faulty.
Make sure it has not been
blocked by something like a
fork. Remove the cause of the
blockage. If the fault message
appears again, call the Miele
Service Department.
FE 48
Other fault messages
FE..
There is an electronic
fault.
Interrupt the power supply to the
hob for approx. 1 minute.
If the problem persists after
reconnecting the appliance to
the power supply, please
contact the Miele Service
department.
Problem solving guide
53