Signing off the hob
If you want to sign off from the Miele{home system, first
prepare the signing off procedure on the master appliance
(see the "Miele|home" fitting and installation instructions).
^
With the hob switched off, touch the s and $ sensors at
the same time until the safety lock indicator light flashes.
After selecting programming mode, P (Programme) and S
(Status) will appear in the timer display. On hobs with 3
cooking zones, an additional indicator will appear at the rear
left.
^
Touch the sensor for selecting the front left cooking zone
and then touch the 1 on the numerical keypad
(Set Programme 10).
^ Touch the sensor for selecting the front right cooking zone
and then touch the 1 on the numerical keypad
(Set Status 1 = Signed off).
The signing-off process starts, and the number 1 flashes. The
signing off process will take a few minutes. The number 1 will
light up constantly when the process has been completed
successfully.
^ To save the setting, touch the s sensor until all the
displays go out.
^
Proceed as described in the "Miele|home" or Con|ctivity
fitting and installation instructions.
Con|ctivity and Miele|home
64