Filter
Top Products
Description of the appliance
KM 83-2
b Control panel
c Normal burner
dFast burner
e Pan support
f Ring support for the Normal burner
g Burner cap
h Ignitor
i Ignition safety control
j Burner head
k Cable for connection
to electrical supply approx. 3.6 ft
(1.10 m) long.
l Control for front burner
m Control for rear burner
KM 93-2
b Control panel
c Normal burner
d Pan support
e Ring support for the normal burner
f Burner cap
g Ignitor
h Ignition safety control
i Burner head
j Fast burner
k Normal burner
l Cable for connection
to electrical supply, approx. 3.6 ft
(1.10 m) long
m Control for the front right burner
n Control for the rear right burner
o Control for the rear left burner
p Control for the front left burner
Data plate
Because the data plate is no longer
visible once the appliance has been in-
stalled, a 2nd data plate is supplied
which should be placed into the space
provided on page 15 of these instruc-
tions.
Special accessories
Special accessories are available from
your Miele Dealer or from the Miele
Parts Department.
Stainless steel cover EA 80
A stainless steel cover is available for
the KM 83-2 cooktop. Check availa-
bility in each country.
For installation of the cover, a minimum
distance of 20" (510 mm) is required be-
tween the countertop and wall cabinets.
Note:
The pan support must be removed be-
fore lowering the stainless steel cover
(EA80).
Do not install the DA 8-2 directly
next to the gas hob.
Description of the appliance
3