Filter
Top Products
^
Unscrew hinge pin j and fit it into
the neighbouring hole in the hinge
bracket.
^
Turn cover f through 180°, and fit it
on the other side.
^
Remove stoppers k, and unscrew
hinge bracket l.
^
Turn hinge bracket l through 180°
and screw into position on the
opposite side.
^
Refit stoppers k on the opposite
side.
^ Remove the stoppers from the door
bearing bushes in the doors and refit
on the opposite side.
^ Hang the upper door on hinge pin j
and then close the appliance door.
^ Push hinge pin e with the longer
section at the top from below into
hinge bracket l in the upper door.
^ Hang the lower appliance door on
hinge pin e.
^
Fit hinge pin c from below into the
lower door.
^ Slowly close the lower door. As you
do so hinge pin c will slide into the
guides on the side of door bearing
b.
^ Secure hinge pin c by fitting screw
a into the door bearing.
Changing the door hinging
40