Filter
Top Products
^
Remove the foil from the adhesive
strips.
^
Attach a toe-kick cover to the plinth.
Attaching the cover strips
If the frame width is narrow, the cover
strip side piece may need to be
shortened.
To determine the required length of the
side piece, one test piece is enclosed
with the cover strip.
^ Cut the cover strips (long for the
sides of the door) to the required
length X.
^ Push the cover strips on the into the
gap between the furniture door and
glass pane.
^
Cut the cover strips (short for the top
and bottom of the door) to the
required length Y.
^
Push the cover strips into the gap
between the furniture door and glass
pane.
Installation
57