Miele KWT 1602 Vi Refrigerator User Manual


 
Placing the appliance in the
niche
If you are installing two appliances
side by side, now secure the
appliances to one another (see the
instructions for the side-by-side
installation kit).
^ Unscrew the plinth facing.
^
Secure the edge protector supplied
a to protect the adjacent furniture
fronts.
^
Plug in the appliance b.
Connection should be made via a
suitable switched socket. The socket
should be close to the appliance
and easily accessible. Otherwise the
appliance should be connected via
an external all-pole switch with a
sufficient contact gap in the open
position.
When installing two appliances side
by side, each appliance must have
its own separate socket.
^ Secure the cable to prevent it
becoming caught:
Tie a piece of string to the middle of
the cable, and as the appliance is
being pushed into the niche, pull the
cable forward underneath the
appliance c.
^ Carefully push the appliance back
into the niche, clipping the feet into
the anti-tipping mechanisms d.
If the appliance does not slide easily
into the niche (e.g. if the floor is
uneven),
^
adjust the rear feet slightly (see
"Aligning the appliance").
Then push the appliance into the
niche, taking care not to damage the
electrical cable.
^
Remove the edge protector a from
the adjacent furniture fronts.
Installation
51