Filter
Top Products
Installation work and repairs should only be performed by a qualified
technician in accordance with all applicable codes and standards. Repairs
and other work by unqualified persons could be dangerous and may void the
warranty.
The following faults can be corrected without contacting the Miele Service
Department:
What if a program will not start?
Possible fault Solution
The door is not closed properly. Close the door firmly.
The "System lock" has been
activated.
See "System lock" for more information.
The appliance is not correctly
plugged in.
Check the plug.
The circuit breaker has tripped. Check the breaker.
Why is a noise heard after a program has ended?
This is not a fault. The cooling fan will continue to run for a short time after the
microwave has been switched off to dissipate any moisture from the interior. This
will prevent it from settling on the control panel or surrounding furniture. The fan
will turn off automatically.
What if the display does not light up?
Possible fault Solution
The time of day display has been
turned off.
Press and hold "m" for a few seconds.
The "Overnight turn-off" setting is
activated.
See "Settings".
Frequently asked questions
34