Filter
Top Products
Interrupting or re-starting a
programme
At any time you can . .
...interrupt a programme:
^
Press the Stop/C button or open the
appliance door.
The time stops counting down.
...continue the programme:
^
Close the door and press Start.
The programme continues.
Altering the settings
If you discover after starting a
programme that . .
...themicrowave power level is too
high or too low, you can
^ select a new level.
...theduration set is too short or too
long, you can
^
interrupt the programme (press the
Stop/C button once), use the time
selector to set a new duration and
continue the programme (press the
Start button),
or alternatively:
^
the cooking duration can be
increased by pressing the Start
button during operation. Each time
the Start button is pressed, the
cooking duration is increased by
another minute. (Exception: the
increased cooking duration is in
increments of 30 seconds when the
microwave is being used on
maximum power.)
To cancel a programme
^
Press the Stop/C button twice.
At the end of a programme
An audible tone will sound when the
cooking programme is complete. The
interior lighting goes out.
The audible tone will sound briefly as a
reminder every 5 minutes for 20
minutes after the end of the
programme.
^
If you want to stop the audible tone,
press the Stop/C button.
Automatic keep-warm function
The keep-warm function will switch on
automatically at 80 W for a maximum of
15 minutes approx. 2 minutes after the
end of a cooking programme which has
used at least 450 W, providing the door
remains closed and no buttons are
pressed.
h,80WandH:H will light up in the
display.
Opening the door or operating one of
the buttons or selectors while the
keep-warm function is in progress
cancels the function.
The keep-warm function cannot be set
as a separate function.
Operation
34