Filter
Top Products
… Care and maintenance
16
Replacing the halogen light
A Fold down the glass panel.
A Using a small screw driver, carefully remove the
ring.
A Replace the defective halogen light with a bulb
of the same type (max. 20 watts).
A Clean the ring and the glass.
A Fit the ring and the glass back into the openings.
A Fold the glass panel up again.
A Put back screw fuse or switch on circuit breaker again.
Remove screw fuse for appliance or switch off
circuit breaker.
Avoid touching the new halogen light with
bare hands. Use a soft, dry and grease-
free cloth.