Filter
Top Products
8
3. When cooking time is over, the oven will
be switched off automatically and an
acoustic alarm will be heard, while the
pilot lamp will start flashing. Turn the oven
function and the thermostat control knob
to zero.
To switch off the acoustic alarm, press
any button. NOTE: when doing this
operation, the oven will be operated again,
therefore, remember to turn the oven
function and the thermostat control knob
to zero when cooking is over.
To cancel the End Time:
1. Press button repeatedly to select the
“End Time” function. The relevant pilot
lamp will flash and the display will show
the programmed End of cooking time.
2. Press button “
” until the display shows
the current time of day. The programmer
will beep and the pilot lamp will go out.
“Cook Time” and “End Time”
combined
The functions “Cook Time” and “End Time”
can be used simultaneously to set the oven to
switch on and off automatically at a later time.
1. With the “Cook Time” function (carry out
the cooking duration setting as described
in the relevant chapter) set the duration
time. Then, press button
: the display
will show the programmed setting.
2. With the “End Time” function (carry out the
End of cooking setting as described in
the relevant chapter) set the end of
cooking time.
The relevant pilot lamps will come on and
the display will show the time of day. The
oven will switch on and off according to
the set programmes.