Filter
Top Products
9
Press button repeatedly to select the “Cook
Time” function. The relevant pilot lamp will
start flashing. Then, proceed as follows:
To set the duration time:
1. press button “
” or “ ”.
2. After the setting is carried out, wait for 5
seconds: the "Cook Time" pilot lamp will
come on and the display will revert to the
time of day.
3. When cooking time is over, the oven will
be switched off automatically and an
acoustic alarm will be heard, while the
pilot lamp will start flashing. Turn the oven
function and the thermostat control knob
to zero.
To switch off the acoustic alarm, press
any button. NOTE: when doing this
operation, the oven will be operated again,
therefore, remember to turn the oven
function and the thermostat control knob
to zero at the end of the cooking time.
To cancel the duration time:
1. Press button repeatedly to select the
“Cooking Duration” function. The relevant
pilot lamp will flash and the display will
show the remaining cooking time.
2. Press button “
” until the display shows
“0:00”. After 5 seconds the pilot lamp will
go out and the display will revert to the
time of day.
“End Time” function
Thanks to this function, you can set the oven
to switch off automatically when a programmed
end of cooking time is over. Place food in the
oven, select a cooking function and adjust the
cooking temperature. Press button
repeatedly to select the “End Time” function.
The relevant pilot lamp will start flashing.
Then, proceed as follows:
To set the End Time:
1. press button “ ” or “ ”.
2. After the setting is carried out, wait for 5
seconds: the “End Time” pilot lamp will
come on and the display will revert to the
time of day.