Filter
Top Products
3
4
Press the On/Off Button (16) to start the
brewing process. To stop the brewing process,
press the button a second time.
3
Close the Lid and replace the Jug on the
Warming Plate.
2
Spoon filter coffee into the Removable
Permanent Filter (7). We recommend 7g of
coffee per cup. Place the Filter into the Filter
Holder (8) in the coffee maker ensuring the
Filter Holder clicks into place.
Using your coffee maker
1
Fill the Water Reservoir (9) with cold water. Do
not overfill.
• Take your coffee maker out of the box and remove
the packaging.
• Wash the detachable parts of the machine in
warm soapy water.
• The first time you use your coffee maker, operate
the coffee maker with water only.
• When the coffee maker is plugged in, the display
will illuminate and flash.
• To set the time, use the Hour (13) and Minute (14)
Buttons. The display is a 24 hour clock.
• When the coffee maker is in standby mode, you
can use the Hour and Minute Buttons to adjust
the clock.
• Switch off the coffee maker and allow 3 minutes
to cool before refilling with cold water.
• Use this feature if you want your coffee to taste
more intensive.
1
Fill the Water Reservoir to water level 4 and add
your required amount of coffee into the
Removable Permanent Filter (7).
2
Before pressing the On/Off button (16), press the
Aroma Function Button (15). The aroma and
On/Off lights will illuminate on the display.
3
The aroma brewing cycle will then commence,
taking longer than the standard brewing cycle,
creating a more intense coffee flavour.
• To stop the aroma brewing cycle, simply press the
Aroma Function Button (15).
Before first use
Setting the clock
Using the Aroma Function
Refilling your coffee maker
47087 rev3_Layout 1 10/06/2011 09:55 Page 3