After the brewing cycle has finished, your coffee
maker will switch to the keep warm mode for 2
hours.
The lights on the Display will switch off when the
keep warm cycle has finished.
To switch the keep warm mode off press the
On/Off Button
(16).
• Unplug the coffee maker and allow to cool.
• Do not immerse the coffee maker in liquid.
• Rinse the Water Reservoir occasionally with cold
water. Do not use a cloth as any residue or lint
may be left behind to clog the coffee maker.
• Remove the Permanent Filter, discard any used
coffee and wash. Extended soaking helps to
remove coffee stains from the mesh.
• Wash the Glass Jug, Jug Lid, and Filter Holder in
warm soapy water. Rinse and dry all parts
thoroughly. Refit the Filter and Filter Holder.
• Wipe all external surfaces, including the warming
plate, with a damp cloth and dry thoroughly.
• Care must be taken to ensure that the non-drip
valve situated on the bottom of the filter holder is
not damaged during cleaning.
• Never use harsh or abrasive cleaners.
• NO parts are suitable for cleaning in a
dishwasher.
Cleaning your coffee maker
Keep warm
4
4
When you have selected the desired time
press the Auto Button (11), a white light will
illuminate. To Cancel, press the Auto Button
(11) again.
3
Select the brewing start time using the Hour
(13) and Minute (14) Buttons.
2
Press the Programme Button (12).
To pre-set a brewing time
1
Follow ‘Using your coffee maker’ steps 1-3 on
page 3.
47087 rev3_Layout 1 10/06/2011 09:55 Page 4