Filter
Top Products
5
Slicing, and grating plates
1 With the processor
bowl already fitted,
place the slicing or
grating plates into the
plate holding disc. The
plates should be placed
into the disc as shown
and clicked into place.
(will only fit one way)
2 Place the plate holding disc onto the shaft
(with the thinner end at the top) onto the
central drive
shaft of the
bowl and
check that it
is firmly fixed
in place.
3 Holding the
cover by the
feed tube, fit
the cover by rotating clockwise. Ensure
that the safety interlocks have clicked into
place. (see setting up the processor)
4 Plug in the processor.
PLEASE NOTE: When using these
discs, never introduce the fingers
into the feed tube. Always use the
food pusher.
Using the citrus pressUsing the citrus press
Using the citrus pressUsing the citrus press
Using the citrus press
1 With the empty processor bowl locked in
place, drop the strainer into the top of
the proces-
sor bowl.
2 Turn the strainer clockwise until the
strainer locks
into the safety
interlock.
A click will be
heard.
3 Drop the citrus
press drive
gear onto
the drive
shaft.
4 Drop the small
citrus press
into the citrus
press support
post .
5 If the large
citrus press
is required
drop the large
citrus press
over the small
citrus press.
6 Plug in the
processor and
select the
speed
required.
Dismantling
after use
1 Unplug the
processor.
2 Remove the processor bowl cover by
turning anti-clockwise.
3 Carefully remove the blade/disc and
shaft/citrus juicer. Remember - the metal
tools are very sharp.
4 Unlock and remove the processor bowl.
Safety interlock