Morphy Richards Toaster Toaster User Manual


 
3
Features of your toaster
Crumb Tray
Cord storage
Electronic variable browning control
Frozen bread button with neon
Cancel button
Re-heat button with neon
Bread carriage lever/high lift feature
Bread slots
Before first use
Before using the toaster for the first
time operate the toaster without
bread. Note: the bread carriage lever
will not stay down unless the toaster
is plugged in and the wall switch is on.
Ventilate the room during this
period.
As with all new electric heating
elements, your toaster emits a ‘new’
smell when it is first switched on. This
is quite normal and not a cause for
concern.
Allow to cool before putting on or
taking off parts.
Do not place on or near a hot gas
electric burner or in a heated oven.
Do not immerse cord, plug or toaster
in water or other liquid.
When unplugging turn any control to
off, then remove the plug from the wall
outlet.
Unplug from the outlet when cleaning.
Unplug from outlet when not in use.
Do not move the appliance whilst hot.
Electrical Requirements
Check that the voltage on the rating
plate of your appliance corresponds with
your house electricity supply which must
be A.C. (Alternating Current).
If the socket outlets in your home are
not suitable for the plug supplied with this
appliance the plug should be removed
and the appropriate one fitted.
IMPORTANT : THE PLUG REMOVED
FROM THE MAINS LEAD, IF SEVERED,
MUST BE DESTROYED AS A PLUG
WITH BARED FLEXIBLE CORD IS
HAZARDOUS IF ENGAGED INTO A
LIVE SOCKET OUTLET.
If you use a 13 amp BS1363 plug, a 13
amp BS1362 fuse must be fitted.
WARNING : THIS APPLIANCE MUST
BE EARTHED.