Morphy Richards Toaster Toaster User Manual


 
Crumb tray
Crumbs will accumulate in the
crumb tray and could catch fire if not
emptied periodically. When the toaster
has cooled down completely, tap the
sides of the case lightly to dislodge any
crumbs lodged in the toasting chamber
and pull out the crumb
tray
. Empty the tray
and replace it.
Never operate the
toaster without
the crumb tray
fitted.
Helpline
If you have any difficulty with your
appliance, do not hesitate to call us.
We’re more likely able to help than the
store from where you bought it.
Please have the following information
ready to enable our staff to deal with your
query quickly.
Name of the product
Model number as shown on the
underside of the appliance.
5
Additional pointsAdditional points
Additional pointsAdditional points
Additional points
In order to achieve uniform browning,
we recommend you wait a minimum of
30 seconds between each toasting, so
that the control can automatically be
reset.
If toasting one slice only, you may
need to adjust the browning control to
a slightly lower setting.
Note you will also notice a slight
variation in toast colour on one side of
a single slice.
Stale bread toasts more rapidly than
fresh bread. Therefore, the browning
control should be set at a lower setting
than usual.
All sorts of bread can be used as well
as teacakes, small rolls etc. Slices
should not however be so thick as to
cause burning or jamming within the
bread slots.
When toasting 2 or more slices it is
recommended they are of equal size
and freshness.
Allow the toaster to cool fully before
putting away.
Cleaning and
Maintenance
1 After use and before cleaning, switch
off at the mains, remove the plug from
the wall socket and wait for the toaster
to cool.
2 Wipe the outside of the toaster with a
damp cloth only and dry with another
cloth or tissue.
NEVER use metal polish or coarse
scouring agents and never immerse
your toaster in any sort of liquid.
NEVER use any pointed or sharp
articles for cleaning the inside,
otherwise the heating element will be
damaged.
NEVER use a brush or push your
fingers or metal objects down the slots.