Moyer Diebel 501HTN Dishwasher User Manual


 
15
6. Check the rinse cycle temperature gauge during the final rinse cycle to ensure
the final rinse temperature ranges between 180-195°F/82-91°C for high
temperature models.
7. The green in-cycle light goes out completing the cycle. The final rinse water
is held for the next wash cycle.
8. Open the dishwasher door and remove the dishrack of clean wares.
9. Repeat steps 2-8 for additional cycles.
Scrub Mode (extended wash) - Model 501HT Only
The SCRUB (extended wash) cycle is ideal for pots, pans, and heavily soiled items.
1. Follow STEPS 1-5 of the Normal Wash Cycle.
2. Wait 10 seconds to allow detergent to enter into the dishwasher before pressing
the SCRUB push button.
3. Press the SCRUB push button. The light above the SCRUB button illuminates,
indicating that the dishwasher is in a continuous SCRUB (extended wash) mode.
4. Press the SCRUB push button again to take the dishwasher out of the SCRUB
(extended wash) mode. The light above the SCRUB button goes out; the green
light above the START switch will stay illuminated, indicating the dishwasher has
resumed the remainder of the wash cycle.
NOTE:
The dishwasher washes until the SCRUB push button is pressed a second time to stop the Scrub
Mode (extended wash). If the SCRUB push button is not pressed a second time, then the
Scrub Mode will operate for a maximum of 15 minutes and then resume the wash cycle.
Normal Wash Cycle (continued)
Operation
Rinse Sentry Feature
High temperature dishwashers with built-in booster heaters are equipped with the
Rinse Sentry feature. This feature extends the wash cycle for a maximum of
5 minutes to ensure that the nal rinse water temperature is a minimum of 180°F/82°C.
Combination Wash / Rinse
Temperature Gauge
Model 201
Model 401
Prior to S/N W100120006
Separate Wash & Rinse
Temperature Gauges
W R
Model 401HT
Beginning with
S/N W100120006 and above
NOTE:
Models 201 and Models 401, (prior to
S/N W10012006 for Model 401), have a
single temperature gauge to indicate the
wash and rinse water temperatures.
Model 401HT, beginning with S/N
W100120006, has two temperature
gauges. The right-hand gauge indicates
the wash water temperature and the left-
hand gauge indicates the final rinse water
temperature during the final rinse cycle.