Filter
Top Products
INITIAL START-UP
20
The Extended Wash
Operation
The extended wash switch holds the
dishwasher in a continuous wash mode
for cleaning heavily soiled ware.
Open and then fully close the
dishwasher doors. The dish-
washer will begin a wash
cycle automatically.
Push the Extended wash switch UP
to the extended wash position.
The dishwasher will remain in
a continuous wash mode until
the switch is flipped down. The dishwasher will
resume the cycle and finish with a final rinse.
Drain the dishwasher
Make sure the dishwasher
power switch is turned off.
Drain the dishwasher by
pulling the handle of the
drain-overflow assem-
bly straight up. Rotate the
handle 90° to lock the drain
in the up position.
INITIAL START-UP (Cont.)
Complete the initial start-up
Check all the plumbing for leaks. Also, check the drain plumbing for leaks and be sure that the drain will
handle the drain water flow (15 gal/min-56.8 liters/min) from the dishwasher.
After the drain and the plumbing connections are checked, turn off the dishwasher power switch.
11
10
12
WASH
EXTENDED
WASH
CYCLE
POWER
OFF
RINSE PRESSURE