Filter
Top Products
INITIAL START-UP
11
Install the Scrap Screens
and Drain-Overflow Assembly
Install scrap screens.
Make sure rubber stopper is secure on the
drain-overflow assembly.
Make sure the drain-overflow
seats securely in the tank bottom.
MAKE SURE DOORS
ARE FULLY CLOSED.
The controls are located
on the front of the dishwasher.
A- On/Off power switch
B- Power indicator Light
C- In-cycle light
D- Extended wash switch
E- Wash water temperature gauge
F- Final rinse pressure gauge
INITIAL START-UP
Complete the installation
After plumbing and electrical connections are made, follow
the steps below to complete the installation of your dishwasher.
1. Remove the white protective covering from the
exterior of the machine.
2. Remove any foreign material from inside
the machine.
3. Make sure dishwasher power switch is off.
4. Turn main water supply on.
5. Turn main power on at the main power
service disconnect switch.
1
2
WASH
EXTENDED
WASH
CYCLE
POWER
OFF
RINSE PRESSURE
C
F
D
A
B
E