Filter
Top Products
2) Place paper, permanent or gold tone filter
into the removable filter insert and close
the brew basket.
3) Place the empty decanter on the
warming plate.
Make sure to fully place the decanter
on the warming plate to avoid the
possibility of overflow.
4) Start the brew cycle. See Page 10
for “Brewing Coffee Now.”
For Switch Models:
• Push the ON/OFF switch so the light
illuminates (to begin the brew cycle).
For Programmable Models:
• Push the On button to begin
the brew cycle.
a. When half of the vinegar has flowed
into the decanter, turn the coffeemaker
Off and let the vinegar stand for 30 minutes.
Then, turn coffeemaker on and let cycle
complete.
b. Repeat Steps 1 – 4.
14 15
c. Discard the vinegar. Fill the decanter with tap
water and pour it into the water reservoir.
d. Place the decanter on the warming plate
and begin the brew cycle.
e. Turn the coffeemaker Off and discard the
water in the decanter. If necessary, repeat
steps
c through e to flush all traces of vinegar
from the coffeemaker.
Cleaning the Decanter
Hard water can leave a whitish stain on the decanter.
Coffee and tea may then turn this stain brown.
To remove decanter stains:
1) Fill the decanter with a solution of equal parts
tap water and vinegar and let the solution stand
in the decanter for approximately 20 minutes.
2) Discard the solution and wash and rinse
the decanter.
Do not use harsh abrasive cleansers
that may scratch the decanter;
scratches may cause the decanter
to break.