Filter
Top Products
5
Clean Before First Use
1. Wash the pitcher, steeping basket, steeping basket lid and pitcher lid
in mild detergent and water. Rinse each thoroughly. THESE ITEMS
ARE NOT DISH WASHER SAFE.
WARNING: To prevent injury from hot steam, do not plug the unit in
until water is in the reservoir and the pitcher is in place.
2. Fill the pitcher with water to the top water level mark on the pitcher
and pour into the water reservoir. Do not overfill.
3. Place ice cubes in the pitcher to the top of the ice level mark on the pitcher.
4. Place the steeping basket, with lid, into the pitcher, and slide under the
machine. Make sure the pitcher is pushed snug against the machine
(See Figure C).
5. Plug the cord into an electrical outlet and push the ON button to begin the
brewing cycle. The indicator light will illuminate to let you know the machine
is ON (See Figure D).
6. When the water has cycled through,
the unit
will shut off automatically.
The indicator light will turn OFF to let you know the cycle is complete.
7. Slide the pitcher away from the machine (See Figure E).
8. Remove steeping basket and discard the water in the pitcher.
DIAGRAM OF PARTS
WATER
RESERVOIR
PITCHER
PITCHER
LID
STEEPING
BASKET LID
ON-OFF
INDICATOR
L
IGHT
STEEPING
BASKET
POWER
“ON”
B
UTTON