Filter
Top Products
MQ-MIKASA MVH-402DSB PLATE COMPACTOR — PARTS & OPERATION MANUAL — REV. #2 (03/30/05) — PAGE 23
MVH-402DSB—MAINTENANCE
Troubleshooting
See Tables 8 (engine) and 9 (plate compactor) on proceeding
pages for troubleshooting guide.
BATTERY MAINTENANCE
1. Check the battery terminals periodically to ensure
that they are in good condition.
2. Use wire brush or sand paper to clean the battery
terminals.
3. Check battery for cracks or any other damage. If white
pattern appears inside the battery or paste has
accumulated at the bottom, replace the battery.
4.. If the machine will not be in operation for a long
period of time, store in cool dry place and check the
battery charge level every month to maintain the
performance of the battery.
BATTERY CABLE CONNECTION
1. Take off the battery cover by removing the M6 nuts (Figure
24).
2. When removing cable, disconnect the ground side (normally
negative) first (Figure 24).
3. When installing cable connect the ground side (normally
negative) last.
Figure 24. Battery Maintenance
Wear
safety glasses
or
face mask, protective
clothes
, and
rubber gloves
when working with
battery.
CAUTION